A workshop compressor you can keep running while people are talking. Two 25L receivers and a sealed oil-free piston set deliver 720 litres per minute at a full 10 bar, all held inside a double-wall acoustic cabinet.
Most compressors of this rating are loud enough to force a workshop to switch them off whenever a customer walks in. The SP-25L*2 changes that with a cabinet built to hold the noise in, without giving up a single litre per minute of air.
Inside, a sealed piston set runs without oil and feeds two 25-litre receivers. The twin-tank layout smooths the delivery, so the pressure needle barely moves while you work and an airbrush or a small gun never starves mid-job.
For anyone who shares a space with clients, works in a residential area, or simply wants to keep the workshop calm, this is the same machine with the sound handled properly.
An inner shell lined with sound-absorbing material traps piston slap before it reaches the outer panel, and vibration feet cut the path that would carry the beat into a concrete floor.
Enough flow to keep an airbrush or a small HVLP gun fed through a full panel, with two receivers acting as a buffer so the next pass starts at full pressure.
No crankcase to drain and no oil mist in the air line, so there is nothing to contaminate a delicate coat. Upkeep is a receiver drain and a clean intake filter.
Separate intake and exhaust channels keep the motor cool, so the machine can work through a full shift rather than being cycled to cool down.
No. The flow and pressure ratings are unchanged — the acoustic cabinet only controls the sound that leaves the machine.
It feeds either comfortably. Running two tools at once is best supported with an auxiliary receiver for buffer.
None. The piston set is sealed and runs oil-free for its service life.
Standard 220V single phase; other voltages can be arranged for OEM orders.
Units go out in reinforced export cartons on pallets, tanks empty and valves closed.